Product Description:
Polyamide Nylon 66 is a kind of high-performance engineering plastic granules made of polyamide. It is reinforced with glass fiber and offers excellent mechanical properties such as high tensile strength, high temperature resistance, excellent abrasion resistance and good dimensional stability.
This polyamide granules, also known as PA66GF25 pellets, offers a tensile strength of ≥80 MPa, shore hardness of 80±5, a density of 1.25-1.35 g/cm3 and comes in a 25 Kg/bag specification. It is also characterized by its excellent flame retardancy, chemical resistance, weather resistance and electrical insulation properties. The glass fiber reinforced plastic granules are an ideal choice for a wide range of applications due to their superior resistance to wear and tear and their long-term performance.
Features:
1. It has excellent mechanical properties, high strength, high toughness.
2. The material has excellent coloring ability, can achieve various requirements of color matching
3. The shrinkage rate of PA66 is between 1% and 2%. The addition of glass fiber additives can reduce the shrinkage rate to 0.2%~1%. The shrinkage ratio is large in the flow direction and in the direction perpendicular to the flow direction.
4. PA66 is resistant to many solvents, but is less resistant to acids and other chlorinating agents.
5. PA66 excellent flame retardant performance, by adding different flame retardants can achieve different levels of flame retardant effect.
Technical Parameters:
Polywell PA66 Granules Performance Table
| NO. | Item | Unit | GB/T 23615.1-2009 | PW-Technical specification |
| | Material Properties |
| 1 | Density | g/cm3 | 1.3±0.05 | 1.28-1.35 |
| 2 | Linear expansion coefficient | K-1 | (2.3-3.5)*10-5 | (2.3-3.5)*10-5 |
| 3 | Vicat softening temperature | ºC | ≥230 | ≥233 |
| 4 | Melting point | ºC | ≥240 | ≥240 |
| 5 | Testing for tensile cracks | - | No cracks | No cracks |
| 6 | Shore hardness | - | 80±5 | 80-85 |
| 7 | Impact strength(Unnotched) | KJ/m2 | ≥35 | ≥38 |
| 8 | Tensile strength(longitudinal) | MPa | ≥80a | ≥82a |
| 9 | Elasticity modulus | MPa | ≥4500 | ≥4550 |
| 10 | Elongation at break | % | ≥2.5 | ≥2.6 |
| 11 | Tensile strength(transverse) | MPa | ≥70a | ≥70a |
| 12 | High temperature tensile strength(transverse) | MPa | ≥45a | ≥47a |
| 13 | Low temperature tensile strength(transverse) | MPa | ≥80a | ≥81a |
| 14 | Water resistance tensile strength(transverse) | MPa | ≥35a | ≥35a |
| 15 | Aging resistance tensile strength(transverse) | MPa | ≥50a | ≥50a |
1. Sample water content less than 0.2% by weight.
2. Norm laboratory condition:(23±2)ºC and (50±10)% relative humidity.
3. The specifications marked with "a" only applies to I-shape strip otherwise, the specifications concluded between supplier and buyer through consultation, shall be written in contract or purchase order.
Applications:
Specially used in thermal break strips, thermal bridge, heat insulation bar, etc.
Support and Services:
Polyamide Nylon 66 provides technical support and services, such as:
- Assistance with product selection
- Technical advice on product use
- Product testing and analysis
- Product troubleshooting
- Product customization
- Product warranty
Packing and Shipping:
| Packaging details | 25kg/bag |
| Lead time | 10-15 working days |
| Delivery details | 15-16 tons per 20 feet container 24-25 tons per 40 feet container |
FAQ:
-
Q: About Sample
A: Sample is Free, but the express fee is collect or you pay us the cost in advance.
Q: About MOQ
A: For the polyamide granules, MOQ is 1 ton. For the thermal break strips, MOQ is 5,000 meters.
Q: About Customizing Special shape of polyamide Profiles and its period
A: You can customize the special shape of polyamide strips. If we didn't meet this shape before, we will make new mold for you, and you should pay for the mold.
Q: About Customizing Package Style and Marks
A: You can customize the package style and marks.
Q: Why your price is higher/lower than others?
A: For years specializing in polyamide granules and thermal break strips has bestowed us experienced and skilled technical workers and production workers. We promise the stability of products and the high-quality of raw material. Furthermore, we can provide technical support from raw material to the final appliance. Believe in that you can get better products and service with lower price.
Q: About warranty
A: We are confident in our products, and pack them well before delivery, so usually you will receive your order in good condition. Any quality issue, we will deal with it immediately.
Q: About Payment or other question
A: 50% T/T deposit before production, 50% T/T balance before loading.
Our Company:
Suzhou Polywell Engineering Plastics Company is located in the city of Zhangjiagang, Jiangsu Province, China. Our company has devoted more than ten years to the research and development and production of nylon extruding profiles. According to customer reaction, using our PA66 granules for production can get high yiedl, easy start-up, and get less scrap in the early start-up stage. There will be no lack or incomplete of profiles in the production process, thus avoiding material waste.
Contact us:
Pleass feel free to contact us if you have any questions.
Name: Camille
E-mail: camille@szpolywell.cn
Tel: +86-13584481777 (WhatsApp)
Address: Zhangjiagang City, Jiangsu Province, China
